>Features of DB plastic Teflon electric diaphragm pump
>The DB type stainless steel electric diaphragm pump does not require water filling and has a self-priming capacity of more than 1 meter.
It has good passing performance, and particles and mud with a diameter of less than a millimeter can pass through effortlessly.
Since the diaphragm separates the transported medium from the transmission mechanical parts, the medium will never leak out. And the pump itself has no shaft seal, which greatly extends its service life. According to different media, diaphragms are divided into chloroprene rubber, fluorine rubber, nitrile rubber, etc., which can meet the requirements of different users.
The part where the medium flows through the pump body of the electric diaphragm pump can be divided into cast iron, aluminum alloy, stainless steel, rubber-lined, and fluorine-lined according to user requirements. The motor is divided into ordinary type and explosion-proof type (Bd). ?
>DB Plastic Teflon Electric Diaphragm Pump Parameters
d Specifications
d Flow
d Lift
d Suction Lift
d Power
d cast iron
d aluminum alloy
d stainless steel
d plastic
d reducer
d
d
d
d
d
d ☆
d ☆
d ☆
d /
d
d
d
d
d
d
d ☆
d ☆
d ☆
d /
d
d
d
d
d
d
d ☆
d ☆
d ☆
d ☆
d
d
d
d
d
d
d ☆
d ☆
d ☆
d ☆
d
d < br/> d
d
d
d
d ☆
d ☆
d ☆
d ☆
d
/> d
d
d
d
d
d ☆
d ☆
d ☆
d ☆
d
d
d
d
d
d
d ☆
d ☆
d ☆
d /
d
d
d
d
d
d
d ☆
d ☆
d ☆< br/> d /
d
>Installation precautions for DB plastic Teflon electric diaphragm pump
It is strictly prohibited to install a valve at the pump outlet. If a valve is necessary, a safety valve must be installed at the outlet. The working pressure Do not exceed kilograms to avoid losses.
, should be refueled in time to keep the lubrication system operating normally.
When the pump is in use, the ambient temperature should be less than ℃, and the motor temperature should not exceed ℃.
The transported medium and its temperature should be within the allowable range of the pump material.
When the conveyed liquid is a medium that is prone to precipitation and crystallization, the accumulation in the pump should be cleaned and drained promptly after use to avoid damage when it is restarted
Plastic Teflon Electric Diaphragm Pump